Non-thermal plasma assisted polymer surface modification and synthesis: A review
Abstract
Keywords: plasma, modification, synthesis, NTP, polymers, functional groups
DOI: 10.3965/j.ijabe.20140702.001
Citation: Cheng Y L, Wang Y K, Chen P, Deng S B, Ruan R. Non-thermal plasma assisted polymer surface modification and synthesis: A review. Int J Agric & Biol Eng, 2014; 7(2): 1－9.
Keywords
Full Text:
PDFReferences
Morent R, De Geyter N, Desmet T, Dubruel P, Leys C. Plasma surface modification of biodegradable polymers: a review. Plasma Processes and Polymers, 2011; 8: 171–190.
De Geyter N, Morent R. Non-thermal plasma surface modification of biodegradable polymers. Biomedical Science, Engineering and Technology, 2012: 225–246.
Borges A, Benetoli L, Licínio M, Zoldan V, Santos-Silva M, Assreuy J, Pasa A, Debacher N, Soldi V. Polymer films with surfaces unmodified and modified by non-thermal plasma as new substrates for cell adhesion. Materials Science and Engineering: C, 2013; 33: 1315–1324.
Zhao J H, Sheadel Debra A, Xue W. Surface treatment of polymers for the fabrication of all-polymer MEMS devices, Sensors and Actuators A: Physical, 2012; 187: 43–49.
Yoshida S, Hagiwara K, Hasebea T, Hotta A. Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release, Surface and Coatings Technology, 2013; 233: 99–107.
Woo S K, Min H, Lee J-O, Song Y-H. Controlling hydrophilicity of polymer film by altering gas flow rate in atmospheric-pressure homogeneous plasma, Applied Surface Science, 2014; 295: 198–202.
Kolskáa Z, Řezníčkováb A, Nagyováb M, et al. Plasma activated polymers grafted with cysteamine improving surfaces cytocompatibility. Polymer Degradation and Stability, 2014; 101: 1–9.
Junkar I. Plasma treatment of amorphous and semicrystalline polymers for improved biocompatibility. Vacuum, 2013, 98: 111–115.
de Valencea S, Tilleb J-C, Chaabane C. Plasma treatment for improving cell biocompatibility of a biodegradable polymer scaffold for vascular graft applications. European Journal of Pharmaceutics and Biopharmaceutics, 2013, 85(1): 78–86.
Peyvandi A, Abideen S U, Huang Y. Surface treatment of polymer microfibrillar structures for improved surface wettability and adhesion. Applied Surface Science, 2014; 289, 15: 586–591.
Zhao J H, Debra A. Sheadel, Wei X. Surface treatment of polymers for the fabrication of all-polymer MEMS devices. Sensors and Actuators A: Physical, 2012, 187: 43–49.
Dowling D P, Tynan J, Ward P. Atmospheric pressure plasma treatment of amorphous polyethylene terephthalate for enhanced heatsealing properties. International Journal of Adhesion and Adhesives, 2012, 35: 1–8.
Thomas M. Browna, G. Mattia Lazzerinib, Lisa J. Parrott. Time dependence and freezing-in of the electrode oxygen plasma-induced work function enhancement in polymer semiconductor heterostructures. Organic Electronics, 2011, 12(4): 623–633.
Guimond S, Wertheimer M R. Surface degradation and hydrophobic recovery of polyolefins treated by air corona and nitrogen atmospheric pressure glow discharge. Journal of Applied Polymer Science, 2004; 94(3): 1291–1303.
Tory A. Wolf. Atmosphoric pressure plasma for surface modification. Published by Scrivening Publishing LLC. 2012; 6-10 p.
De Geyter N, Morent R, Leys C, Gengembre L, Payen E. Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure. Surf. Coat. Technol., 2007; 201: 7066–7075.
Massines F and Gouda G, A comparison of polypropylene- surface treatment by filamentary, homogeneous and glow discharges in helium at atmospheric pressure. J. Phys. D: Appl. Phys., 1998; 31: 3411–3419.
Landgrafa R, Kaiserb M-K, Posseckardt J, et al. Functionalization of Polymer Sensor Surfaces by Oxygen Plasma Treatment. Procedia Chemistry, 2009; 1: 1015–1018.
Hagiwaraa K, Hasebea T, Hottaa A. Effects of plasma treatments on the controlled drug release from poly (ethylene-co-vinyl acetate). Surface and Coatings Technology, 2013; 216: 318–323.
Mortazavi M, Nosonovsky M. A model for diffusion-driven hydrophobic recovery in plasma treated polymers. Applied Surface Science, 2012; 258(18): 6876–6883.
Akkana C K, Hammadehb M, Brücka S. Plasma and short pulse laser treatment of medical grade PEEK surfaces for controlled wetting. Materials Letters, 2013, 109: 261–264.
Slepička P. Nanostructuring of polymethylpentene by plasma and heat treatment for improved biocompatibility, Polymer Degradation and Stability, 2012; 97(7): 1075–1082.
Farhat S. Polymer coatings for biomedical applications using atmospheric pressure plasma. Surface and Coatings Technology, 2014; 241: 123–129.
Brendan D. Tompkins, Jordan M. Dennison, Ellen R. Fishe. H2O plasma modification of track-etched polymer membranes for increased wettability and improved performance. Journal of Membrane Science, 2013; 428: 576–588.
Tamargo-Martínez K. Tailoring of the interfacial properties of polymeric single fibre-reinforced epoxy composites by non-oxidative plasma treatments. Composites Part A: Applied Science and Manufacturing, 2013; P102–109.
Molina R. In situ chitosan gelation initiated by atmospheric plasma treatment. Carbohydrate Polymers, 2014; 103: 472–479.
Dorai R, Kushner M J. A model for plasma modification of polypropylene using atmospheric pressure discharges. J. Phys. D: Appl. Phys., 2003; 36: 666–685.
O’Hare L-A, Leadley S, Parbhoo B. Surface physicochemistry of corona-discharge- treated polypropylene film. Surface and Interface Analysis, 2002; 33: 335–342.
Inagaki N, Narushima K, Hashimoto H and Tamura K. Implantation of amino functionality into amorphous carbon sheet surfaces by NH3 plasma Carbon, 2007; 45: 797–804.
Wang M, Chang Y, Poncin-Epaillard F. Effect of the addition of hydrogen in the nitrogen cold plasma: the surface modification of polystyrene. Langmuir, 2003; 19: 8325–8230.
Kral M, Ogino A and Nagatsu M. Effect of hydrogen on amino group introduction onto the polyethylene surface by surface-wave plasma chemical modification. J. Phys. D: Appl. Phys., 2008; 41: 105213–105219.
Ogion A, Kral M, Narushima K, Yamashita M and Nagatsu M. Surface Amination of Biopolymer Using Surface-Wave Excited Ammonia Plasm. Japanese Journal of Applied Physics, 2006; 45(10B): 8494–8497.
Ogino A, Kral M, Yamashita M, Nagatsu M. Effects of low-temperature surface-wave plasma treatment with various gases on surface modification of chitosan. Applied Surface Science, 2008; 255: 2347–2352.
Lee J H, Kim H G, Khang G S, Lee H B and Jhon M S. Characterization of wettability gradient surfaces prepared by corona discharge treatment. Journal of Colloid and Interface Science, 1992; 151(2): 563–570.
Abdou et al. Antimicrobial activity of pypropylene and cotton. Journal of Applied Polymer Science, 2008; 108: 2290–2296.
Wesley C. Chang, David W. Sretavan. Novel High-Resolution Micropatterning for Neuron Culture Using Polylysine Adsorption on a Cell Repellant, Plasma- Polymerized Background, Langmuir. 2008; 24: 13048– 13057.
Ren C-S. Surface modification of PE film by DBD plasma in air Applied Surface Science, 2008; 255: 3421–3425.
Zhao X Y, Hu X. Preparation and Characterization of Plasma-Polymerized Benzonitrile Films With Ultrafast Optical Kerr Effect. Polymer Engineering And Science, 2000; 40(12): 2551–2557.
Micusik M. Conductive polymer-coated textiles: The role of fabric treatment by pyrrole-functionalized triethoxysilane. Synthetic Metals, 2007; 157: 914–923.
Jiang Z Q, Jiang Z J. Plasma techniques for the fabrication of polymer electrolyte membranes for fuel cells. Journal of Membrane Science, 2014; 456: 85–106.
Jiang Z Q, Yu X Y, Shi Y C, Meng Y D. The synthesis and characteristics of polymer nanoballs by plasma polymerization cooperating with DC plasma sputtering technique. Thin Solid Films, 2010; 518(22): 6609– 6613.
Barman T, Arup R. Pal. Pulsed DC discharge for synthesis of conjugated plasma polymerized aniline thin film. Applied Surface Science, 2012; 259: 691–697.
Ono T, Akagi T, Ichiki T. Anisotropic etching of amorphous perfluoropolymer films in oxygen-based inductively coupled plasmas. J. Appl. Phys., 2009; 105: 013314.
Yasuda H, Gazicki M. Biomedical applications of plasma polymerization and plasma treatment of polymer surfaces. Biomaterials, 1982; 3(2): 68–77.
Lu W, Yang Q L, Yan B H, Cheng Y. Plasma-assisted synthesis of chlorinated polyvinyl chloride (CPVC) characterized by online UV–Vis analysis. Chemical Engineering Journal, 2012; 207–208: 923–930.
Jafari R, Tatoulian M, Morscheidt W, Arefi-Khonsari F. Stable plasma polymerized acrylic acid coating deposited on Polyethylene (PE) films in a low frequency discharge (70 kHz). Reactive & Functional Polymers, 2006; 66 : 1757– 1765.
Chambers D K, Raut B, Qi D F, Chad B. O'Neal, Sandra Zivanovic Selmic. The effect of helium plasma etching on polymer-based optoelectronic devices. Thin Solid Films, 2009; 517: 5743–5746.
Goddard J M., Hotchkiss J H. Polymer surface modification for the attachment of bioactive compounds Progress in Polymer Science, 2007; 32(7): 698–725.
Spomenka S, Dusan L, Krasimir V. Controlled drug release from porous materials by plasma polymer deposition Chem. Commun., 2010; 46, 1317–1319.
Antonini V, Torrengo S, Marocchi L, Minati L, Dalla Serra M, Baod G, Speranza G. Combinatorial plasma polymerization approach to produce thin films for testing cell proliferation. Colloids and Surfaces B: Biointerfaces, 2014; 113: 320–329.
Copyright (c)